Sure, your GT350’s factory 526HP is great, but since you’re reading this, that means you’re ready for more! Whether you’re looking for a Performance Package to take your Voodoo 5.2L up to over 900HP, or are interested in specific services, we can help you meet your goals!
These packages use no power adder such as supercharger, turbocharger, or nitrous, and instead are designed to increase the engines performance by improving efficiency.
| JLT Performance air-intake system |
| Includes fuel tank drain and refill with E85 for calibration |
| HP Tuners credits |
| Professional installation |
| Professional Flex Fuel dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more. |
| JLT Performance air-intake system |
| Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters |
| OEM Ford multi-layer steel exhaust manifold gaskets |
| HP Tuners credits |
| Professional installation |
| Includes fuel tank drain and refill with E85 for calibration |
| Professional Flex Fuel calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more. |
These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
| VMP Performance Odin supercharger system |
| 88mm upper supercharger pulley |
| VMP Performance Twinjet twin-69mm throttle body |
| VMP Performance/aFe POWER 120mm intake system |
| VMP Performance billet fuel rails |
| 56lb/hr fuel injectors |
| VMP Performance fuel pump voltage booster |
| NGK LTR7IX-11 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| VMP Performance triple-pass heat exchanger with dual-11.00" electric fans |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more. |
| VMP Performance Odin supercharger system |
| 88mm upper supercharger pulley |
| VMP Performance Twinjet twin-69mm throttle body |
| VMP Performance/aFe POWER 120mm intake system |
| VMP Performance billet fuel rails |
| 56lb/hr fuel injectors |
| VMP Performance fuel pump voltage booster |
| NGK LTR7IX-11 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| VMP Performance triple-pass heat exchanger with dual-11.00" electric fans |
| Stainless Works Stainless Power custom-built 1.875” primary ID long-tube headers with high-flow catalytic converters |
| OEM Ford multi-layer steel exhaust manifold gaskets |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more. |
| VMP Performance Odin supercharger system |
| GripTec custom 86mm upper supercharger pulley |
| VMP Performance Twinjet twin-69mm throttle body |
| VMP Performance/aFe POWER 120mm intake system |
| VMP Performance billet fuel rails |
| 56lb/hr fuel injectors |
| VMP Performance fuel pump voltage booster |
| NGK LTR7IX-11 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| VMP Performance triple-pass heat exchanger with dual-11.00" electric fans |
| Stainless Works custom-built 2.00” primary ID long-tube headers with high-flow catalytic converters |
| OEM Ford multi-layer steel exhaust manifold gaskets |
| Mantic Clutch 9000 series Ceremetallic twin-disc clutch |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more. |
These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
| Whipple Superchargers 3.0L Gen-V W185RF Stage-1 supercharger system |
| 3.875" upper supercharger pulley |
| Whipple Superchargers 132mm billet Roval throttle body |
| DeatschWerks 72lb/hr fuel injectors |
| Denso ITV-22 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| Whipple Superchargers 3.0L Gen-V W185RF Stage-1 supercharger system |
| 3.750" upper supercharger pulley |
| Whipple Superchargers 132mm billet Roval throttle body |
| DeatschWerks 72lb/hr fuel injectors |
| Denso ITV-22 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| Stainless Works custom-built 2.00” primary ID long-tube headers with high-flow catalytic converters |
| OEM Ford multi-layer steel exhaust manifold gaskets |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
| Whipple Superchargers 3.0L Gen-V W185RF Stage-1 supercharger system |
| 3.625" upper supercharger pulley |
| Dual 11.00" electronic heat exchanger fan |
| Whipple Superchargers 132mm billet Roval throttle body |
| DeatschWerks 72lb/hr fuel injectors |
| Denso ITV-22 spark plugs |
| MMR billet oil pump gears & crankshaft sprocket |
| MMR cylinder head cooling modification (HCM) |
| Stainless Works custom-built 2.00” primary ID long-tube headers with high-flow catalytic converters |
| OEM Ford multi-layer steel exhaust manifold gaskets |
| Mantic Clutch 9000 series Ceremetallic twin-disc clutch |
| Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation |
| JLT Performance passenger-side air/oil separator |
| HP Tuners credits |
| Baseline dyno runs |
| Professional installation |
| Professional dyno calibration |
| ADDITIONAL OPTIONS AVAILABLE Ask Your Performance Consultant *Pricing shown does not include applicable taxes, shipping and shop fees. |
These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
CURRENT PAGE Current taxonomy: vehicle Current term: Shelby GT350 & GT350R Current term ID: 33 EXISTS CHECK Post type exists package: yes Taxonomy exists vehicle: yes Taxonomy exists package-type: yes POST CHECK Total package posts: 439 PACKAGE TYPE MATCH CHECK Vehicle term being checked: Shelby GT350 & GT350R (ID: 33) TURBOCHARGED PACKAGE (turbocharged-package) Matching posts: 0 NATURALLY ASPIRATED (naturally-aspirated) Matching posts: 2 Matched package titles: - 16-20 Mustang GT350 – NA – Stage 1+ E85 | 565-570hp - 16-20 Mustang GT350 – NA – Stage 2+ E85 | 580-585hp WHIPPLE SUPERCHARGED (whipple-supercharged) Matching posts: 3 Matched package titles: - 16-20 Mustang GT350 – SC – Stage 3 | 905-925hp - 16-20 Mustang GT350 – SC – Stage 2 | 875-895hp - 16-20 Mustang GT350 – SC – Stage 1 | 845-865hp VMP SUPERCHARGED (vmp-supercharged) Matching posts: 3 Matched package titles: - 16-20 Mustang GT350 – VMP SC – Stage 3 | 885-905hp - 16-20 Mustang GT350 – VMP SC – Stage 2 | 865-885hp - 16-20 Mustang GT350 – VMP SC – Stage 1 | 845-865hp STOCK SUPERCHARGER (stock-supercharger) Matching posts: 0 STOCK SUPERCHARGER - E85 (stock-supercharger-e85) Matching posts: 0 ECOBOOST (ecoboost) Matching posts: 0 SUPERCHARGED (supercharged) Matching posts: 0 STOCK EATON SUPERCHARGER (stock-eaton-supercharger) Matching posts: 0 MAGNUSON SUPERCHARGER (magnuson-supercharger) Matching posts: 0 CAMSHAFT HEADS ON (camshaft-heads-on) Matching posts: 0 CAMSHAFT HEADS OFF (camshaft-heads-off) Matching posts: 0 C8 (c8) Matching posts: 0 REDEYE (redeye) Matching posts: 0 DEMON (demon) Matching posts: 0 STOCK SHORT BLOCK (stock-short-block) Matching posts: 0 IAG SHORT BLOCK - UPGRADES (iag-short-block-upgrades) Matching posts: 0 IAG SHORT BLOCK - STAND ALONE (iag-short-block-stand-alone) Matching posts: 0 TUNABLE ECU (tunable-ecu) Matching posts: 0 NON-TUNABLE ECU (non-tunable-ecu) Matching posts: 0 SUPERCHARGED BY HARROP (supercharged-by-harrop) Matching posts: 0 SUPERCHARGED BY MAGNUSON (supercharged-by-magnuson) Matching posts: 0 COMING SOON (coming-soon) Matching posts: 0